ASTRO VG Series User Manual

88
4.2.10 VD-1673 (HDMI SWITCHER)
The VD-1673 is an HDMI switcher (with 2 inputs and 8 outputs) made by ASTRODESIGN.
The settings described in this section take effect only when the VD-1673 is connected to the generator
and the “mode in which control is exercised by the VG series” has been selected.
* Be absolutely sure to connect the VD-1673 before turning on the power of the generator.
For further details on the settings, refer to the operating instructions of the VD-1673.
<Setting procedure>
(1)
Select Program Edit using
MENU
or
INC
DEC
, and then press
SET
.
(2)
Select Output (TIM) using
or
INC
DEC
, and then press
SET
.
(3)
Select Digital Output using
or
INC
DEC
, and then press
SET
.
(4)
Select HDMI using
or
INC
DEC
, and
then press
SET
.
(5) Select VD-1673 (HDMI SWITCHER) using
or
INC
DEC
, and then press
SET
.
(6)
<Inputting the parameters>
Select the parameters using
or
INC
DEC
, and then press
SET
.
Alternatively:
Select the parameters using the number keys
(
0/STATUS
to
9/F
), and then press
SET
.
<Table of setting items>
The items are set for each of the HDMI1 and HDMI2 output channels.
The output mode is selected here.
0
Selection
Selection mode
(1)
Mode (0/1)
1
Distribution
Distribution mode
(2)
IN
The input port is selected here.
Setting range: 1 to 2
(3)
OUT
The output port is selected here.
Setting range: 1 to 8

ASTRO VG Series Specifications

General

Brand	ASTRO
Model	VG Series
Category	Portable Generator
Language	English