ASTRO VG Series User Manual

Chapter 2 OPERATION PROCEDURES
19
2.1.4 Selecting the actions
There are two ways to select actions.
1) Select the action using the action key.
2) Select and set the action for each program data.
1) Selecting the action using the action key
(1)
Press the
ACTION
key.
The action selection screen is displayed.
The selected action is indicated by a check mark .
To select the window action, the window pattern must be
displayed first.
GC-SCROL
Check this to scroll the pattern.
G-SCROLL
Check this to scroll the pattern.
C-SCROLL
Check this to scroll the pattern.
W-SCROLL
Check this to scroll the window.
W-FLICKR
Check this to flicker the window.
W-LEVEL
Check this to change the window level.
W-L.SEQ
Check this to execute the window level
sequence.
M-BLUR
Check this to execute motion blur.
(2)
Select the action using
or
INC
DEC
,
and then press
SET
.
S-SCROLL
Check this to scroll the subtitle pattern.
On this screen, the scroll direction and number of steps are
set when the GC-SCROL, G-SCROLL or C-SCROLL
action has been checked.
←, →, ↑, ↓
Select these to scroll in the directions of
the arrows.
||
Select this to stop the scrolling temporarily.
RESET
Select this to return the pattern to its
original position.
(It is displayed only while scrolling is
stopped temporarily.)
STEP+1
Select this to increment the scroll step by
1.
STEP-1
Select this to decrement the scroll step by
1.
(3)
Select the action using
or
INC
DEC
,
and then press
SET
.
EDIT
Select this to perform the detailed scroll
settings.

ASTRO VG Series Specifications

General

Brand	ASTRO
Model	VG Series
Category	Portable Generator
Language	English