ASTRO VG Series User Manual

304
6.3.2 Ramp pattern type settings and customizing
Described below is the procedure for selecting the types of ramp patterns and for performing the settings when
CUSTOM has been selected as the ramp pattern type.
(If CUSTOM is selected, the ramp patterns can be displayed with any level and steps.)
(1)
Select Program Edit using
MENU
or
INC
DEC
, and then press
SET
.
(2)
Select Pattern (PAT) using
or
INC
DEC
, and then press
SET
.
(3)
Select Pattern/RGB/INV select using
or
INC
DEC
, and then press
SET
.
(4)
Select Ramp using
or
INC
DEC
, and
then press
SET
.
(5)
Press
ESC
.
(6)
Select Ramp using
or
INC
DEC
, and
then press
SET
.
<Setting the type>
Select Type using
or
INC
DEC
, and
then press
SET
.
(7)
<Setting the parameters>
Select the parameters using or
INC
DEC
, and then press
SET
.
Alternatively:
Select the parameters using the number keys
(
0/STATUS
to
9/F
), and then press
SET
.
For further details on the patterns, refer to “6.3.1 Types of
ramp patterns.”

ASTRO VG Series Specifications

General

Brand	ASTRO
Model	VG Series
Category	Portable Generator
Language	English