8
1.4.7 VG-870B/871B/873/874 side panel
※
* Note
Open or close this cover when inserting or removing a CF card for the moving image module.
Do not open the cover while the power is on.
1.4.8 Tools used to operate the VG-870B/871B/873/874
The table below lists the operation tools of this generator and the restrictions on the operation of each of
these tools.
Operation tool Restriction on operation Remarks
VG-870B/873
front panel
These enable all the generator
functions to be operated.
The controls can be used only by
the VG-870B/873 main unit.
RB-1870
These enable all the generator
functions to be operated.
This remote control box makes it
possible to perform the same
operations as the ones which are
performed on the front panel of
the VG-870B/873.
RB-1871
Programs can be read only.
This is a simplified remote control
box which is intended for use on
production lines.
SP-8870
These enable all the generator
functions to be operated.
This software program is intended
for performing operations and
editing using a PC.
To Next Page
Loading...
Need help?
General
