314
6.7.2 Aspect ratio pattern type settings and customizing
Described below is the procedure for selecting the types of aspect ratio patterns and for performing the settings
when CUSTOM has been selected as the aspect ratio pattern type.
(If CUSTOM is selected, the aspect ratio patterns can be displayed with any level.)
(1)
Select Program Edit using
MENU
or
INC
DEC
, and then press
SET
.
(2)
Select Pattern (PAT) using
or
INC
DEC
, and then press
SET
.
(3)
Select Pattern/RGB/INV select using
or
INC
DEC
, and then press
SET
.
(4)
Select Aspect using
or
INC
DEC
,
and then press
SET
.
(5)
Press
ESC
.
(6)
Select Aspect using
or
INC
DEC
,
and then press
SET
.
<Setting the type>
Select Type using or
INC
DEC
, and
then press
SET
.
(7)
<Setting the parameters>
Select the parameters using or
INC
DEC
, and then press
SET
.
Alternatively:
Select the parameters using the number keys
(
0/STATUS
to
9/F
), and then press
SET
.
For further details on the types of patterns, refer to “6.7.1
Types of aspect ratio patterns.”
To Next Page
Loading...
Need help?
General
