Chapter 4 INTERFACE SETTINGS
267
4.16.2 Audio sweep settings
When Internal PCM is selected by the Digital Audio > Source setting, the audio sweep function is
available, and the audio output frequency is incremented at the specified interval.
For further details on the audio sweep settings, refer to “4.1.9 Audio sweep settings.”
4.16.3 Flash data entry (option)
Audio data (VT-8500-0006/0008, etc.) can be stored in the VG-870B/871B/873/874.
(1)
Preparations
Store audio data on a CF card, and insert the
card into the slot on the front panel of the
VG-870B/871B/873/874.
* Audio data and a sample program are saved in the
VT-8500-0006/0008 (CD).
For further details on audio data storing procedures,
refer to the VT-8500-0006/0008 (CD) instruction
manual.
(2)
Select Audio Flash Data Entry using
MENU
or
INC
DEC
, and then press
SET
.
(3)
Select the parameters using
or
INC
DEC
, and then press
SET
.
Specify the number of the audio data group to be stored.
(4)
Select EXECUTE using
or
INC
DEC
,
and then press
SET
to store the data.
Note: Do not eject the CF card or turn off the power of
the VG-870B/871B/873/874 until “Complete”
appears on the screen.
* Groups of audio data up to 64MB created by SP-8870 software can be saved in the VG-870B/871B/873/874.
4.17 Audio sweep setting
For details on the audio sweep settings, refer to “4.1.9 Audio sweep settings.”
To Next Page
Loading...
Need help?
General
