ASTRO VG Series User Manual

Chapter 12 PRECAUTIONARY ITEMS
541
12.2.3 PC analog unit (VM-1811)
The dot clock frequency is restricted by the pattern drawing bit length (Color Depth) shown in the figures
below. 10-bit D/A converter is installed in the PC analog unit, and data skipping occurs when the
pattern drawing bit length (Color Depth) is more than 10 bits. A DVI-I (Single Link) unit is also installed,
and the data skipping occurs when the pattern drawing bit length (Color Depth) is more than 8 bits.
データが切り捨てられています
8Bit
9、10Bit
11、12Bit
13、14Bit
15、16Bit
Color Depth：
D/A Converter:
250MHz0.1MHz 340MHz200MHz100MHz 300MHz
5M 300M
10Bit
DotCLK
300M
300M
280M
240M
5M
5M
5M
5M
Restrictions on dot clock frequency for RGB, Dsub15, DVI (analog)
Color Depth > Mode の場合、データが切り捨てられています 。
Color Depth < Mode の場合、データ”0"が付加されています。
8Bit
9、10Bit
11、12Bit
13、14Bit
15、16Bit
Color Depth：
Mode:
250MHz0.1MHz 340MHz200MHz100MHz 300MHz
165M
25M
25M
25M 165M
設定なし[ Single(8Bit) ]
DotCLK
25M
25M 165M
165M
165M
データが切り捨てられています
Restrictions on dot clock frequency for DVI (digital)
For details on the pattern drawing bit length (Color Depth), refer to “4.1.5 Setting the bit length (gray
scale) for pattern drawing.”
The data in is rounded off.
When Color Depth > Mode, the data is rounded off.
When Color Depth < Mode, data “0” is added.
The data in is rounded off.
Not set [Single (8 bits)]

ASTRO VG Series Specifications

General

Brand	ASTRO
Model	VG Series
Category	Portable Generator
Language	English