ASTRO VG Series User Manual

Chapter 6 PATTERN SETTINGS
351
6.12 Cursor patterns
A cursor can be displayed on screens which show pattern displays.
The cursor can be moved to any point, and its position on the screen can be displayed.
6.12.1 Cursor settings
The cursor can be selected by following the operation procedure below.
For further details on pattern selection, refer to “2.1.3 Selecting the pattern data.”
(1)
Select Program Edit using
MENU
or
INC
DEC
, and then press
SET
.
(2)
Select Pattern (PAT) using
or
INC
DEC
, and then press
SET
.
(3)
Select Pattern/RGB/INV select using
or
INC
DEC
, and then press
SET
.
(4)
Select Cursor using or
INC
DEC
,
and then press
SET
.
(5)
Press
ESC
.
(6)
Select Cursor using
or
INC
DEC
,
and then press
SET
.
<Selecting the items>
Select the items using
or
INC
DEC
,
and then press
SET
.
(7)
<Setting the parameters>
Select the parameters using
or
INC
DEC
, and then press
SET
.
Alternatively:
Select the parameters using the number keys
(
0/STATUS
to
9/F
), and then press
SET
.
For further details on the parameters, refer to <Table of
cursor setting items> below.

ASTRO VG Series Specifications

General

Brand	ASTRO
Model	VG Series
Category	Portable Generator
Language	English