ASTRO VG Series User Manual

452
10.5.2 Formatting CF cards for exclusive use of moving images
Described below is the procedure used to format the CF card used exclusively for moving images.
* The CF card for exclusive use of moving images is used with the moving image module, and its ejection slot is
located on the side panel of the VG main unit. (For further details, refer to “1.4.7 VG-870B/871B/873/874 side
panel”) Bear in mind that the file system for these cards is different from the system for the CF cards used by the
slot on the front panel of the VG main unit.
(1)
Select Maintenance using
MENU
or
INC
DEC
, and then press
SET
.
(2) Select FORMAT : CF-Card (Moving Image)
using
or
INC
DEC
, and then press
SET
.
(3)
Press
SET
to perform formatting.
(4) A confirmation message is displayed.
To continue the formatting, select
SET
; to
cancel the formatting, select
ESC
.
:
:
:
Formatting is completed.
↓
Now Formatting ...
↓
Card Format Completed
↓
Display in step (3)

ASTRO VG Series Specifications

General

Brand	ASTRO
Model	VG Series
Category	Portable Generator
Language	English