Chapter 1 CONCERNING THE VG-870B/871B
7
1.4.5 VG-870B/871B/873/874 rear panel
MADE IN JAPAN
SER.NO.
MOD E L
ASTRO DESIGN ,Inc.
AC IN (100 -240 V ) T5A
SCART 2SCART 1
RS- 232 C
REMOTE
LAN
U .S Patent Nos. 4,631 ,603 ;4, 577,216 ;
4,819 ,098 ;4, 907,093 ;and 6,516 ,132 .
TRIG
1
2
USB
SLOT 2
SLOT 1
SLOT 0
DVI-I
VGA
CS VS HS B/P G/Y R/P
BR
PC
VGA D5Y/C
LR
PYPCOMPOSITE
BR
ANALOG AUDIO OUT
TV
HDMI 2
DIGITAL AUDIO IN
OPTICA L
COAXIAL
HDMI 1
LR
I S
2
ANALOG AUDIO IN
HDMI
(N)(M)(L)(K)(J)(I)
(H)
(O) (P)
1.4.6 Names of connectors and their applications
(H) AC power socket Connect the power cable here.
Any voltage from 100 V to 240 V is supported.
(I) Frame ground
Connect this frame ground terminal to the frame ground
terminal of the unit which is connected to the
VG-870B/871B/873/874.
(J) TRIG connector
This is the trigger input/output connector.
(K) RS-232C connector
RS -232C
This is used to connect a personal computer using an
RS-232C cable.
(L) Remote connector
REM O TE
This is used to connect the dedicated remote control box
(RB-1870 or RB-1871) to operate the generator by remote
control.
(M) LAN port
LAN
This port is used for connection to a LAN using the Ethernet
cable.
(N) Units
These connectors enable up to three interface units (VM18XX
series) to be installed.
(O) USB (1)
1
This connector supports a regular USB mouse.
* When the cursor is displayed
Using the USB mouse, the pointer on the monitor can be
moved.
(P) USB (2)
2
This connector is used to connect the generator with a PC to
enable the VG-870B/871B to be operated using the SP-8870
software, etc. Refer to the instruction manual of the SP-8870
software for further details.
To Next Page
Loading...
Need help?
General
