ASTRO VG Series User Manual

542
12.2.4 DVI unit (VM-1814)
The dot clock frequency is restricted by the pattern drawing bit length (Color Depth) shown in the figures
below. Data skipping occurs when the output video bit length (Video Width) at this time is less than the
pattern drawing bit length (Color Depth).
Color Depth > Mode の場合、データが切り捨てられています 。
Color Depth < Mode の場合、データ”0"が付加されています。
8Bit
9、10Bit
11、12Bit
13、14Bit
15、16Bit
Color Depth：
Mode:
250MHz0.1MHz 340MHz200MHz100MHz 300MHz
165M
25M
25M
25M 165M
Single(8Bit)、(16Bit)
DotCLK
25M
25M 165M
165M
165M
Restrictions on dot clock frequency for DVI (Single Link)
データが切り捨てられています
Color Depth > Mode の場合、データが切り捨てられています 。
Color Depth < Mode の場合、データ”0"が付加されています。
8Bit
9、10Bit
11、12Bit
13、14Bit
15、16Bit
Color Depth：
Mode:
250MHz0.1MHz 340MHz200MHz100MHz 300MHz
50M
50M 330M
Dual(8Bit)
DotCLK
330M
330M
280M
240M
50M
50M
50M
Restrictions on dot clock frequency for DVI (Dual Link)
For details on the pattern drawing bit length (Color Depth), refer to “4.1.5 Setting the bit length (gray
scale) for pattern drawing.”
For details on the output video bit length (Mode), refer to “4.3.2 DVI unit setting procedure.”
When Color Depth > Mode, the data is rounded off.
When Color Depth < Mode, data “0” is added.
When Color Depth > Mode, the data is rounded off.
When Color Depth < Mode, data “0” is added.
The data in is rounded off.

ASTRO VG Series Specifications

General

Brand	ASTRO
Model	VG Series
Category	Portable Generator
Language	English