Chapter 5 FUNCTIONS AVAILABLE WITH TV STANDARD SIGNALS
293
• Bit8-7: CGMS-A
Bit
7 8
Application
0 0 Copy is permitted without restriction
1 0 Condition not to be used
0 1 One generation of copies may be made
1 1 No copying is permitted
• Bit14-9: Other service information (not supported by the VG-870B/871B/873/874)
• Bit20-15: CRC
5.5.2 Setting procedure
(1)
Select Program Edit using
MENU
or
INC
DEC
, and then press
SET
.
(2)
Select Output using
or
INC
DEC
,
and then press
SET
.
(3)
Select VBI Function using
or
INC
DEC
, and then press
SET
.
(4)
Select CGMS-A/ID-1 using
or
INC
DEC
, and then press
SET
.
(5)
<Selecting the setting items from the table>
Select the parameters using
SET
or
INC
DEC
, and then press
SET
.
(6)
<Setting the parameters>
Select the parameters using
or
INC
DEC
, and then press
SET
.
Alternatively:
Select the parameters using the number keys
(
0/STATUS
to
9/F
), and then press
SET
.
For further details on the setting items and parameters,
refer to <Table of the CGMS-A and ID-1 setting items>
below.
Upon completion of the settings:
Press
MENU
.
Display returns to the initial screen.
To Next Page
Loading...
Need help?
General
