ASTRO VG Series User Manual

422
9.1.11 Image - priority settings
Image priority settings can be performed.
Data can be saved both in the internal memory of the VG-870B/871B/873/874 or on CF cards.
This setting is used to set the priority when both sets of image data have been made valid.
Utilizing it brings some advantages such as increasing the drawing speed and dispersing the data to the internal
memory and CF card and then calling the saved data.
(1)
Select Configuration using
MENU
or
INC
DEC
, and then press
SET
.
(2)
Select General using
or
INC
DEC
,
and then press
SET
.
(3)
Select Image Priority using
or
INC
DEC
.
Select the setting using or
INC
DEC
,
and then press
SET
.
Alternatively, select the setting using the number
keys (
0/STATUS
to
9/F
).
OFF:
When a CF card is inserted, only the image data on the CF
card is valid. The image data in the internal memory is
invalid.
Internal > CF:
The image data both in the internal memory and on the CF
card are valid. In this mode, reading of the image data in
the internal memory takes priority. An increase in the
drawing speed can be expected.
CF > Internal:
The image data both in the internal memory and on the CF
card are valid. In this mode, reading of the image data on
the CF card takes priority.

ASTRO VG Series Specifications

General

Brand	ASTRO
Model	VG Series
Category	Portable Generator
Language	English