Chapter 6 PATTERN SETTINGS
327
《 3D Image Pattern setting item list 》
Select images.
0 User
1 MonoScope
(1) Image Type (0-2)
2 China
(2) Image No. L,R When Image Type is set as 0(User), the image number (user image) selected here is
displayed.
(3) Left Image Gap
(4) Right Image Gap
Each image is shift to left direction (minus setting), and right direction (plus setting).
Minus value is input by Shift + number keys.
Right and Left picture can be set ON/OFF separately.
If you set OFF, the color you set by Off Color is displayed.
* This menu is displayed when using Non Interlace timing, or 3D format except
frame packing.
0 L=ON , R=ON
1 L=ON , R=OFF
(5)
L,R ON/OFF (0-2)
2 L=OFF , R=ON
Right and Left field can be set ON/OFF separately.
If you set OFF, the color you set by Off Color is displayed in OFF field..
* This menu is displayed when using Interlace timing and frame packing.
0 ON Output pattern
(6)
L,R Field ON/OFF
ON/OFF
1 OFF
Pattern is not output.
(7) Level L,R Level of Right and Left pattern can be changed. Setting range : 0 - 100 [%]
(8) Off Color R,G,B Set a color of OFF-frame or OFF-field when you set OFF in « L,R ON/OFF » or « L,R
Field ON/OFF » Setting range : 0 – 255
Set pattern output mode
0 HDMI 3D Structure
Pattern is output referring to the setting of « HDMI 3D Structure »,
This setting is commonly used.
(9) Output Mode
1 Frame Sequential
The left and the right pattern are displayed by every one frame.
In the Simple animation function in the “Action”, set “H=1, V=2” in the
“Repeat”, this frame sequential becomes active.
Please refer to 6.15.2 Simple Animation
Set display type of « LEFT » and « RIGHT » character.
0 OFF Not displayed.
1 TOP Display on the top.
(10) L,R Text (0-2)
2 CENTER
Display in center.
Set black background around « LEFT » and « RIGHT » character.
0 OFF Does not set black around « LEFT » and « RIGHT »
character.
(11) BkBackLRText(0/1)
1 ON
Set black around « LEFT » and « RIGHT » character.
In case of « Side by Side » and « Top & Bottom », set it either normal drawing or
thin-out drawing.
0 OFF Normal drawing
(12) Sub Sampling(0/1)
1 ON Sub-sampling drawing
To Next Page
Loading...
Need help?
General
