ASTRO VG Series User Manual

Chapter 7 ACTION SETTINGS
389
<Table of subtitle scroll setting items>
Scrolling is set to On or Off here.
0
OFF
Scrolling is set to Off.
(1)
Scroll(0/1)
1
ON
Scrolling is set to On.
The scrolling direction is set here.
0
Left
The subtitles are scrolled to the left.
1
Right
The subtitles are scrolled to the right.
2
Up
The subtitles are scrolled to the top.
3
Down
The subtitles are scrolled to the bottom.
4
Left Up
The subtitles are scrolled to the top left.
5
Left Down
The subtitles are scrolled to the bottom left.
6
Right Up
The subtitles are scrolled to the top right.
(2)
Direction(0-7)
7
Right Down
The subtitles are scrolled to the bottom right.
The scrolling interval (execution interval) mode is specified here.
0
User
Scrolling is executed in compliance with the
Interval 1, 2, 3 or 4 setting.
1
60i->60i
1V serves as the interval (execution interval).
2
24p->60i 2-3PullDown
2V and 3V are repeated as the interval
(execution interval).
3
25p->50i
2V serves as the interval (execution interval).
(3)
Mode(0-4)
4
30p->60i
2V serves as the interval (execution interval).
(4)
Interval(Interval 1)
The interval (execution interval) is set here.
Setting range: 1 V to 255 V
This item can be set only when User has been selected as the Mode setting.
In all other modes, a fixed value is displayed.
The amount of movement per interval (execution interval) is set here.
H
Setting range: 1 dot to 4095 dots
This item takes effect only when Left or Right has been selected as the
Direction setting.
(5)
Step(Step 1)
V
Setting range: 1 H to 4095 H
This item takes effect only when Up or Down has been selected as the
Direction setting.
The items listed below are set only when User has been selected as the Mode setting.
(6)
Interval 2 - 4
The interval (execution interval) is set here.
Setting range: 0 V to 255 V
When a setting other than “0” has been set, the set conditions are repeated in
sequence starting from Interval 1.
Example: Interval 1 → Interval 2 → Interval 3 → Interval 1 → ...
The amount of movement per interval (execution interval) is set here.
This is the amount of movement (step) which corresponds to the Interval 2-4
settings.
H
Setting range: 0 dot to 255 dots
This item takes effect only when Left or Right has been selected as the
Direction setting.
(7)
Step 2 - 4
V
Setting range: 0 H to 255 H
This item takes effect only when Up or Down has been selected as the
Direction setting.

ASTRO VG Series Specifications

General

Brand	ASTRO
Model	VG Series
Category	Portable Generator
Language	English