ASTRO VG Series User Manual

Chapter 8 HDCP SETTINGS AND EXECUTION
403
c) Setting enable or disable for each program
This setting takes effect when “Program” was selected as the HDCP mode setting in b) Setting enable or
disable using Configuration.
(1)
Select Program Edit using
MENU
or
INC
DEC
, and then press
SET
.
(2)
Select Output (TIM) using
or
INC
DEC
, and then press
SET
.
(3)
Select All Output using
or
INC
DEC
, and then press
SET
.
(4)
Select HDCP using
or
INC
DEC
, and
then press
SET
.
Execute Enable (0/1)
This selects whether HDCP is to be executed.
It covers all the video interfaces capable of executing
HDCP. HDCP is executed at the same time.
0
Disable
HDCP is not executed.
1
Enable
HDCP is executed.
Select the items using or
INC
DEC
,
and then press
SET
.
Display Select (0-4) This item allows the HDCP
authentication status to be displayed for one video interface
system only.
0
Disable
The status is not displayed.
1
HDMI1
The status of HDMI unit channel 1 is
displayed.
2
HDMI2
The status of HDMI unit channel 2 is
displayed.
3
DP1
The status of DP unit channel 1 is
displayed.
4
DP2
The status of DP unit channel 2 is
displayed.
5
DVI2
The status of DVI unit channel 2 is
displayed.
6
PC-DVI
The status of PC unit DVI is displayed.
(5)
<Inputting the parameters>
Select the parameters using
or
INC
DEC
, and then press
SET
.
Alternatively:
Select the parameters using the number keys
(
0/STATUS
to
9/F
), and then press
SET
.
7
TV-DVI
The status of TV unit DVI is displayed.

ASTRO VG Series Specifications

General

Brand	ASTRO
Model	VG Series
Category	Portable Generator
Language	English