66
5 NTSC VBI InfoFrame
6 ACP Packet
7 ISRC 1 Packet
8 ISRC 2 Packet
9 Gamut Metadata
Set the interval of sending packets.
0 Every Frame Send every frame
1 50ms
2 100ms
: :
(2) Interval(0-20)
20 1000ms
Send frame by the setting interval.
● This setting is active when the selected packet (in “Type”)’s output setting is
“ON”.
● The setting value of “Interval” is the interval of executing packet transmission
that is sent from VG’s CPU to HDMI transmitter. Therefore, since the actual
packet transmission is executed by HDMI transmitter, it will appear 1 or 2
frame difference from the theoretical value.
Cau
tion
To Next Page
Loading...
Need help?
General
