1 689 989 300 2020-03-24| Robert Bosch GmbH
48 | EPS 118 | en
6. Commissioning 67
6.1 Transportation and installation 67
6.2 Electrical connection 67
6.3 Connection of compressed air 68
6.4 Filling the tank with test oil 68
6.5 Filling the injection chamber with test oil 69
6.6 Preparation of inlet connector
(special accessories) 69
6.7 Settings 70
6.7.1 Setting the language 70
6.7.2 Connecting the wireless network
(WLAN)xxx 70
6.7.3 Updating software 71
6.7.4 Entering the owners information 71
6.7.5 Backing up user data and protocols 71
6.7.6 Bleeding the system 71
6.7.7 Display mode 72
6.7.8 Maintenance screen 73
7. Operation 74
7.1 Switch-on/switch-off 74
7.2 Connecting a USB printer 74
7.3 Emergency stop switch 74
7.4 Preparation for testing 74
7.5 Cleaning instructions for CRI/CRIN and CRI
Piezoxxx 75
7.6 Connecting the CRI/CRIN and CRIPiezo 75
7.7 Program description 77
7.7.1 Key to symbols 77
7.7.2 Home Screen (Fig. 38) 77
7.7.3 Select CRI/CRIN or piezo CRI (Fig. 39) 78
7.7.4 Entering customer data (Fig. 40) 78
7.7.5 Entering injector data (Fig. 41) 78
7.7.6 Leak test 79
7.7.7 Tests 80
7.7.8 Test report 80
7.8 Topping up test oil 81
7.9 Faults 81
8. Maintenance 82
8.1 Cleaning 82
8.2 Service 82
8.2.1 Service intervals 82
8.2.2 Leak test 83
8.2.3 Changing the high-pressure hose
assembly 83
8.2.4 Checking hose assemblies 83
8.2.5 Cleaning injection chamber 83
8.2.6 Check the O-ring on the
injectionnozzleseat 83
8.2.7 Changing test oil 84
8.2.8 Changing the test oil filter 85
8.2.9 Bleeding the system 85
8.2.10 Replacing the strainer 86
8.2.11 Changing the air filter in the
maintenanceunit 86
8.3 Spare and wearing parts 87
9. Decommissioning 88
9.1 Temporary shutdown 88
9.2 Change of location 88
9.3 Disposal and scrapping 88
9.3.1 Substances hazardous to water 88
9.3.2 EPS 118 and accessories 88
10. Technical Data 89
10.1 EPS 118 89
10.2 Compressor 89
10.3 Noise emissions 89
10.4 Dimensions and weights 89
10.5 Electromagnetic compatibility (EMC) 89
To Next Page
Loading...
