Bosch EPS 118 - Device Components and Description

1 689 989 300 2020-03-24| Robert Bosch GmbH
Product description | EPS 118 | 59 en
5.4.3 Components for testing
10
1
2
3
4
5
6
7
8
9
458900-12_Pal
Fig. 3: Components for testing
1 Injected fuel quantity test connection
2 High-pressure connection
3 Test connection for return quantity (CRI/CRIN/piezo CRI)
4 Clamping bolt for securing CRI/CRIN or piezo CRI
5 Injection chamber
6 Clamping bush for CRI/CRIN or piezo CRI
7 Injection chamber holder
8 Injection chamber height adjusting clamping bolt
9 Test oil filler port (ISO4113)
10 Sockets (X7) or CRI/CRIN or piezo CRI electrical connection
5.4.4 Symbols and connection table for CRI/CRIN,
and CRI Piezo tests
Compo-
nent
Return quantity
test connection
Injected fuel
quantity test
connection
Connecting
cable X7
CRI/
CRIN
CRI
Piezo
458900-10_Pal
458900-09_Pal
Yes
5.4.5 USB port
The USB port (Fig. 2, item6; max. 500mA) is provi-
ded for connection of a USB devices (e. g. WLAN USB
adapter, USB stick or USB printer).
i With the aid of a USB hub, several USB devices can
be connected simultaneously to the EPS 118. The
USB hub must have its own voltage supply.
i It is only permissible to connect printers approved
by Bosch.
5.4 Device description
5.4.1 Front view
1
2
3
4
458900-03_Pal
Fig. 1: Front view
1 Touchscreen
2 Emergency stop switch
3 Oil level display
4 Protective cover with safety switch
5.4.2 Rear view
458900-05_Pal
1
2
5
6
7
8
4
3
Fig. 2: Rear view
1 Device socket with on/off switch and fuse
2 Maintenance unit with water separator
3 Plug-in hose nipple for compressed-air connection
4 Drain valve with drain plug for manual condensate-draining
(0=open, S = closed)
5 Test oil drain shut-off valve
6 Test oil filter
7 Drain plug for oil collecting trough
8 USB port (max. 500mA)