10/188 Safety instructions
Bosch Rexroth AG, MIT: ActiveMover, 3 842 564 874/2021-04
Bosch Rexroth AG is not liable for any damage resulting from improper use. The user
alone bears any risks associated with improper use.
The following foreseeable misuses also constitute improper use:
• Transporting goods other than those specifi ed.
• Operating the product without separating protective equipment.
• Using the product in accumulation operation.
• Transporting people or other living beings on the product or transported material.
• Climbing onto the product.
– The product is not accessible.
• Private use.
• Use of workpiece pallets not belonging to the system.
• Use in potentially explosive atmospheres.
• Installation and operation in environments with electrically conductive dust
(e.g. coal dust, iron dust, etc.).
• Installation and operation in environments with machining processes
(particularly (ferromagnetic) metal-cutting).
2.4 Personnel qualifi cations
The activities described in this documentation require basic knowledge of
mechanical, electrical systems, as well as knowledge of the appropriate technical
terms. Additional knowledge regarding the use of lifting gear and corresponding
slings is required for transporting and handling the product. To ensure safe use,
these activities should therefore only be performed by qualifi ed personnel or by an
instructed person acting under the direction of such a person.
Qualifi ed personnel refers to those who can recognize potential hazards and
take appropriate safety measures based on their technical training, knowledge,
experience, and understanding of the relevant regulations pertaining to the work
being performed. Qualifi ed personnel must comply with the relevant technical
regulations and have the necessary expertise.
Bosch Rexroth offers training support for specialized fi elds. You can fi nd an
overview of the training content online at: http://www.boschrexroth.de/didactic
2.5 General safety instructions
• Observe the applicable accident prevention and environmental protection
regulations.
• Observe the safety rules and regulations of the country in which the product is
being used.
• Only use Rexroth products that are in proper working order.
• Heed all the notices on the product.
• Persons who assemble, operate, disassemble or maintain Rexroth products
should not be under the infl uence of alcohol, drugs or medication that may affect
their ability to respond.
To Next Page
Loading...
