Bosch Rexroth ActiveMover - Table of Contents

3 842 564 874/2021-04, MIT: ActiveMover, Bosch Rexroth AG
3/188 Contents
1 About this documentation 7
1.1 Validity of the documentation 7
1.2 Required and supplementary documentation 7
1.3 Presentation of information 7
1.3.1 Safety instructions 7
1.3.2 Symbols 8
1.3.3 Designations 9
2 Safety instructions 9
2.1 About this section 9
2.2 Intended use 9
2.3 Improper use 9
2.4 Personnel qualifi cations 10
2.5 General safety instructions 10
2.6 Product-specifi c safety instructions 11
2.7 Personal protective equipment 14
2.8 Owner responsibilities 14
3 General notes on property and product damage 15
4 Scope of delivery 15
4.1 Condition on delivery 15
5 About this product 15
5.1 Specifi cations 15
5.1.1 Using ActiveMover linear motor system 15
5.2 Product description 16
5.2.1 Base frames 18
5.2.2 Section module connection kit 3 842 559 452 19
5.2.3 Curve module connection kit 3 842 559 453 20
5.2.4 Fixing plates 3 842 559 454 21
5.2.5 Fixing plate 3 842 559 455 22
5.2.6 Module holder 3 842 559 429 23
5.2.7 Section module 3 842 559 426 24
5.2.8 Curve module 3 842 559 430 29
5.2.9 Workpiece pallet 3 842 559 433 (2 magnets)/3 842 559 434 (3 magnets) 33
5.2.10 IR ID system 40
5.2.11 Power supply 3 842 559 435 41
5.2.12 Control cabinet 3 842 564 861 and 3 842 564 864 42
5.2.13 Connection kit 3 842 559 438 43
5.2.14 Connection kit 3 842 559 449 44
5.2.15 Interface modules 45
5.2.16 Removal tool 3 842 559 439 46
5.2.17 Calibration set 3 842 559 456 47
5.3 Identifi cation of the product 48
6 Transport and storage 48
6.1 Transporting the product 48
6.1.1 Transport suggestion for conveyor/curved units 49
6.2 Storing the product 49
Contents