8/188 About this documentation
Bosch Rexroth AG, MIT: ActiveMover, 3 842 564 874/2021-04
Safety instructions are set out as follows:
SIGNAL WORD
Type and source of danger!
Consequences of non-compliance
Measures to prevent danger
…
• Warning sign: Points out the danger
• Signal word: Indicates the severity of the danger
• Type and source of danger: Indicates the type and source of the danger
• Consequences: Describes the consequences of non-compliance
• Prevention: States how the danger can be avoided
Table 2: Risk classes according to ANSI Z535.6-2006
Warning sign, signal word Meaning
DANGER
Indicates a hazardous situation that will result in severe
injury or death if not avoided.
WARNING
Indicates a hazardous situation that may result in severe
injury or death if not avoided.
CAUTION
Indicates a hazardous situation that may result in minor to
moderate injury if not avoided.
NOTICE
Property damage: The product or the surrounding area
could get damaged.
1.3.2 Symbols
The following symbols indicate important information that is not safety-relevant but
increases the comprehensibility of the documentation.
Table 3: Meaning of the symbols
Symbol Meaning
If this information is not observed, the product cannot be used and/or
operated as designed.
Single, independent action
1.
2.
3.
Numbered steps:
The numbers indicate that the action steps are sequential.
To Next Page
Loading...
