Maintenance and repair 155/188
3 842 564 874/2021-04, MIT: ActiveMover, Bosch Rexroth AG
10.4.24 Replacing the measuring system (encoder) (curve module)
Fig. 113:
2
B
A
SW2,5
5x
3
2
557 186-102
1
M
D
=2 Nm
Replacing the measuring system (encoder) (curve module)
Necessary spare parts
• Measuring system
(encoder) left (A)
3 842 555 960
• Measuring system
(encoder) right (B)
3 842 555 961
1. Remove the caps of the
fi xing screws.
2. Remove the sensor units.
3. Pull off the connection
cable.
4. Install the new sensor
units in reverse order.
5. Calibrate the new sensor
units (see chapter 10.5).
To Next Page
Loading...
