Maintenance and repair 123/188
3 842 564 874/2021-04, MIT: ActiveMover, Bosch Rexroth AG
10.1.2 Base frames of section/curve module
Clean deposits and contamination from the base frames of the section/curve
modules weekly using a clean, soft cloth.
10.1.3 Workpiece pallets
Clean deposits and contamination from the workpiece pallets every month using
a clean, soft cloth.
10.1.4 Measuring system
NOTICE
Damage to the measuring system
The measuring system can be destroyed by magnetic fi elds.
Do not touch the measuring system with magnetic objects.
If necessary and after removal, clean deposits and contamination from the
measuring system using a clean, soft cloth.
For removal of the measuring system, see chapter 10.4.5.
For test of the measuring system, see chapter 10.2.8
10.1.5 Control panel fan
If necessary, clean deposits and contamination from the fan using a clean, soft cloth.
If necessary, replace the fi lter mats in case of coarse contamination.
To Next Page
Loading...
