Bosch Rexroth ActiveMover - IR Reading Head ID System (Optional)

98/188 Installation
Bosch Rexroth AG, MIT: ActiveMover, 3 842 564 874/2021-04
7.6.9 IR reading head ID system (optional)
Fig. 72:
Y
X
1
2
3
557 186-66
Connecting the IR reading head ID system (optional)
X:
Front view
Y:
Rear view
1. Remove the protective
cap of the cable entry
in the rear wall of the
electronics box to the
right of the IR reading
head.
2. Guide the IR reading
head connection cable
into the electronics
box and mount the
cable gland.
3. Connect the connection
cable of the IR reading
head to the printed
circuit board (gateway).