EasyManua.ls Logo

Bosch Rexroth ActiveMover - Disassembly and Replacement; Preparing the Product for Storage;Later Use

Bosch Rexroth ActiveMover
188 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
182/188 Disassembly and replacement
Bosch Rexroth AG, MIT: ActiveMover, 3 842 564 874/2021-04
13 Disassembly and replacement
WARNING
High electrical voltage!
Risk of severe injury or death from electric shock.
Disconnect the relevant system component before performing any maintenance
or repair work.
Secure the system against being unintentionally switched on again.
Suspended loads may fall!
Falling objects can result in severe injury (or even death).
Use only slings with suffi ciently high bearing loads (for product weight,
see delivery documents).
Make sure the lifting straps are correctly fastened before lifting the product.
Secure the product against tipping over when lifting!
Make sure that no one but the operator is in the danger zone during lifting and
lowering!
13.1 Preparing the product for storage/later use
Only set the product down on a fl at surface.
Protect the product from mechanical stress.
Protect the product from environmental infl uences, such as dirt and moisture.
Pay attention to the ambient conditions, see technical data on page 184.

Table of Contents

Related product manuals