Bosch Rexroth ActiveMover - Positioning and Aligning the Base Frame

Installation 55/188
3 842 564 874/2021-04, MIT: ActiveMover, Bosch Rexroth AG
7.5.4 Positioning and aligning the base frame
Fig. 31:
557 186-30
90
(45,5 ... 163,5)
2
2 x Ø10
2 x Ø12
SW36
SW24
= 0,02 mm/m
Positioning and aligning the base frame 3 842 559 450
Please note:
Customer base frames must:
• be dimensioned and
designed according to the
loads to be expected.
• be prepared with the
required mounting
boreholes according to
the dimensional drawing.
1. Position the base frame
at the fi nal place of use.
2. Align the base frame
longitudinally, crosswise
and vertically using
a machine water level.