Bosch Rexroth ActiveMover - Replacing the Guide Rails (Section Module)

Maintenance and repair 141/188
3 842 564 874/2021-04, MIT: ActiveMover, Bosch Rexroth AG
10.4.13 Replacing the guide rails (section module)
Fig. 99:
1
1
557 186-88
Replacing the guide rails (section module)
Please note:
• The long guide
rails 1010 mm must
always be above the
joint between 2 section
modules.
• The short guide
rails 520 mm must always
be at the end of a section
module that connects to
a curve module.
Necessary spare parts
• Guide rail 1010 mm
3 842 555 963
• Guide rail 520 mm
3 842 555 964
1. Pull the guide rail out of
the slot at one end with
a strong magnet.
2. For mounting the new
guide rail, see fi g. 59 on
page 82.