Bosch Rexroth ActiveMover - Replacing the Magnetic Kit

136/188 Maintenance and repair
Bosch Rexroth AG, MIT: ActiveMover, 3 842 564 874/2021-04
10.4.8 Replacing the magnetic kit
Fig. 94:
2
3
4
SW3
4x M4
4
SW5
2x
SW4
4x
M
D
=10 Nm
M
D
=5,8 Nm
M
D
=4,5 Nm
4
SW5
2x M6
M
D
=16 Nm
3842555979
3842555980
557 186-83
Replacing the magnetic kit
Necessary spare parts
• Magnetic kit (2 magnets)
3 842 555 979
• Magnetic kit (3 magnets)
3 842 555 980
Please note:
• The magnetic kit with
2 magnets is fi xed by
means of 2 screws
M6 x 20 (SW5/16 Nm).
• The magnet kit with
3 magnets is fastened
with 4 screws M4 x 20
(SW3/4.5 Nm).
1. Remove the WT from
the ActiveMover
(see chapter 7.5.14).
2. Place the protective plate
with the plastic cover on
the magnetic kit!
3. Remove the front plate
of the WT.
4. Remove the magnetic kit.
5. Install the new magnetic
kit and the front plate in
reverse order.