Bosch Rexroth ActiveMover - Symbols Used

Installation 51/188
3 842 564 874/2021-04, MIT: ActiveMover, Bosch Rexroth AG
7.4 Symbols used
Table 5: Symbols used
21
Connection with T-bolt and fl ange nut.
Make sure the T-bolt is in the correct position when inserting it into the slot and
tightening it. The notch at the head of the screw indicates the orientation of the
T-bolt.
1 = T-bolt insertion position in the slot.
2 = T-bolt clamping position in the slot.
Tightening torque: 25 Nm
M
D
SW13
= 20Nm
Hex wrench
SW = wrench size … mm
M
D
= required tightening torque ... Nm
M
D
= 8Nm
SW5
Hex socket wrench
SW = wrench size … mm
M
D
= required tightening torque ... Nm
No-Tox
®
HD
Food Grade
Oil 46
5 ... 10
Oil/oil with specifi c oil:
• No-Tox® HD Food Grade Oil 46, www.belray.com
The marked parts are not required for the described assembly. Dispose of the
parts or use them for other purposes.
213
Graphical depiction of the assembly steps.
The numbers correspond to the sequence of installation steps, in accordance with
the instructions in the accompanying text.
AB CX
Graphical depiction of the designation of components.
The letters denote the components mentioned in the accompanying text.
Detail view from a different direction,
for example, the back or the bottom side of the product.