130/188 Maintenance and repair
Bosch Rexroth AG, MIT: ActiveMover, 3 842 564 874/2021-04
CAUTION
Injuries can be caused by the workpiece pallet being released suddenly during
disassembly!
Removing the workpiece pallets requires high force to be exerted despite the
removal tool. If the magnetic holding force is exceeded, the workpiece pallet
loosens abruptly.
Always hold the removal tool with both hands.
Ensure secure footing to prevent falling backward.
Be prepared for the sudden loosening of the workpiece pallet.
Danger of crushing during assembly/removal of workpiece pallets!
Additional workpiece pallets near the removal tool constitute a risk of crushing for
hands and fi ngers.
Remove all workpiece pallets in the area of the removal tool.
Risk of crushing when attaching the protective plate on the magnetic kit of the
WT!
Due to the high magnetic forces, the protective plate is suddenly pulled to the
magnetic kit.
Use appropriate protective equipment (e.g. protective gloves and safety goggles)
Be prepared for high forces of attraction.
Place the protective plate with the plastic cover on the magnetic kit!
Keep body parts away from between the protective plate and the magnetic kit.
NOTICE
There is a risk of destruction of electronic components/printed circuit boards
by ESD
Always wear an anti-static wristband to prevent electrostatic charging when
working on electronic components/printed circuit boards.
To Next Page
Loading...
