REH0803 Hybrid cable without communication: The external communica‐
tion signal is input via the RKB0044 connection cable at the
RHS0014 terminal connector or at connection point X118 (al‐
ternative: X119), and it is transmitted to KCU via the RKB0043
and RKB0044 connection cables.
RKB0043 Connection cable (M12 → M12)
RKB0044 Connection cable (M12 → RJ-45)
RHS0014 Terminal connector
int Internal signal processing
LK_C Internal circuit board for communication
X_serc Internal communication interface
Tab. 6-27: Connection
172/407
Connection points
IndraDrive Mi Drive Systems with KCU02, KSM02,
KMS02/03, KMV03, KNK03, KLC03
Bosch Rexroth AG R911335703_Edition 04
To Next Page
Loading...
Need help?
General