10.25 netSWITCH sercos III
The accessory "netSWITCH sercos III" (mat. no.: R911328254) connects a
sercos III network into a standard Ethernet network.
The netSwitch can be used to loop TCP/IP components (e.g. visualization
devices) into the sercos III ring.
See documentation of the accessory for detailed information.
Engineering: The accessory "netSWITCH sercos III" can be looped into the
sercos III ring for drive system engineering. Drive system engineering is also
possible via a connected control unit (MLC) or via a drive with an open sercos
ring (can be connected at terminal connector RHS0014).
Tab. 10-30: netSWITCH sercos III
338/407
Accessories
IndraDrive Mi Drive Systems with KCU02, KSM02,
KMS02/03, KMV03, KNK03, KLC03
Bosch Rexroth AG R911335703_Edition 04
To Next Page
Loading...
Need help?
General