1.3 Type code
1.3.1 Introduction
The type code is the basis of each purchase order of a Rexroth product.
The type code unequivocally describes all variants:
● KSM02 motor-integrated servo drive
● KMS02/KMS03 near motor servo drive
● KCU02 drive connection box
● KMV03 supply unit
● KNK03 mains filter
● KLC03 DC bus capacitor unit
● MPB/PSB firmware (observe the allowed firmware versions; see chapter
1.2.3 "Firmware" on page 9).
Product selection information
For product selection and purchase order, take the following aspects into
account:
● Observe detailed information and instructions in chapter 5 "Technical
data of the components" on page 61 and chapter 7 "Notes on project
planning" on page 217
● Before placing a purchase order, have our sales representative check
whether individual options are available
The figure illustrates the basic structure of the type code. Our
sales representative will help you with the current status of
available versions.
IndraDrive Mi Drive Systems with KCU02, KSM02,
KMS02/03, KMV03, KNK03, KLC03
13/407
System presentation
R911335703_Edition 04 Bosch Rexroth AG
To Next Page
Loading...
Need help?
General