6.5.3 XD3, motor connection
View Connection Function
A1 For power connection U1 at motor
A2 For power connection V1 at motor
A3 For power connection W1 at motor
PE For equipment grounding conductor of motor
Tab. 6-38: Pin assignment
Mechanical data
Screw terminal (connector) Unit min. max.
Connection cable
Stranded wire
mm
2
0.2 6
AWG 24 10
Stripped length mm 10
Tightening torque Nm 0.5 0.8
Tab. 6-39: Mechanical data
Electrical data
Spring terminal (connector) Unit min. max.
Rated voltage V 1000
Nominal current A 41
Tab. 6-40: Electrical data
Cables
Description Value
Order type See description of connectors:
RLS0725
RHS0725
Maximum allowed length 7.5 m
(Maximum allowed length of all motor cables when using KNK03/KMV03:
50 m)
Tab. 6-41: Cables
IndraDrive Mi Drive Systems with KCU02, KSM02,
KMS02/03, KMV03, KNK03, KLC03
191/407
Connection points
R911335703_Edition 04 Bosch Rexroth AG
To Next Page
Loading...
