System components
file:///D|/Manuales/Para%20recolocar/MOTOS/DUCATI/DUCATI/M796/wsm/EN/M796_ABS_11_6_12.35.1.html[11/12/2015 18:40:26]
Refitting the air temperature sensor
Refitting is the reverse of removal.
On completion of the refitting operation, reconnect the wiring connector to the sensor (1).
Operations Section reference
Refit the airbox 8 - 7, Refitting the airbox
Refit the battery 6 - 2,
Refitting the battery
Connect the starter motor/solenoid
cable
6 - 3,
Refitting the starter motor
Connect the ECU connector 6 - 12,
Refitting the electronic
control unit
Refit the fuel tank 8 - 2,
Refitting the fuel tank
Refit the ABS control unit 7 - 6,
Refitting the ABS control unit
Refit the tank covers 5 - 2,
Refitting the fuel tank
fairings
Refit the seat 5 - 3,
Refitting the seat
Spark plug
Clean the area around the spark plug bores with a compressed air jet before removing the spark plugs themselves.
Remove the spark plug caps (1) from the spark plugs in both cylinder heads and remove the two spark plugs, making
sure that no dirt or other objects enter the combustion chamber.
Important
Check the gap between the central and side electrodes.
If the gap is not as specified or if the spark plug is soiled with heavy sooty deposits, renew it.
Refit the spark plug in the cylinder head, first tightening it fully by hand.
Tighten to a torque of 20 Nm (Min. 18 Nm - Max. 22 Nm) (Sect. 3 - 3,
Frame torque settings).
Refit the spark plug caps (1).
To Next Page
Loading...
