314
c HELP Mode Function and Operation Procedures
chap.7
(1) Obtaining 6-digit display of count of total plates
made, divided into 2 higher-order digits and 4 lower-
order digits
q
Access HELP mode H-14, and press the PRINT key.
For the basic procedure for accessing HELP modes.
w
Press and hold the PRINT key. For as long as the key is held
down, the display will alternate at intervals of 0.5 seconds between
the 2 higher-order digits and the 4 lower-order digits.
e
Release the PRINT key. The display will stop alternating and
show steadily the item displayed at the moment of key release.
1. Functions
(1) 6-digit display of count of total plates made, divided
into 2 higher-order digits and 4 lower-order digits
(2) Resetting of count of total plates made in user mode
r
Press the STOP key. The HELP mode selection display will
reappear.
a To exit the HELP mode : Turn the power switch OFF.
a To access another HELP mode : Enter the desired mode number
using the numeric keys.
2. Operation procedures
H-14
(1) Total countsHELP mode
¡ 2 higher-order digits
F
**
.
¡ 4 lower-order digits
****
0.5 sec
[.] = higher-order
[F] = platemaking
\See page 291
To Next Page
Loading...
