322
c HELP Mode Function and Operation Procedures
chap.7
¡Whether the clump is in the A, B or C mode position is determined by the B mode sensor and the A/C mode
sensor in combination:
A mode position : When the light beam of both the B mode and A/C mode sensor is unobstructed.
C mode position : When the light beam of both the B mode sensor is obstructed and that of the A/C mode
sensor unobstructed.
B mode position : When the B mode sensor senses edge, and the light beam of the A/C mode sensor is
obstructed.
¡If the clump is not in the A mode position when the power is turned on, it will rotate to the B position and stop
there.
w
Press and hold down the printing position adjustment key.
The clump motor will rotate in the reverse direction (counterclockwise),
opening out the clump, for as long as the key is held down.
e
To stop opening of the clump, release the printing position
adjustment key. (Alternatively, opening will stop automatically
when the light beam of the A/C mode sensor (PS3) is restored).
r
Press and hold down the printing position adjustment key.
The clump motor will rotate in the regular direction (clockwise),
closing the clump, for as long as the key is held down.
t
To stop closing of the clump, release the printing position
adjustment key. (Alternatively, closing will stop automatically when the
light beam of the A/C mode sensor (PS3) is restored).
1. Functions
(1) Function testing of clump motor and clump position
sensing (A/B/C mode position)
(1) Testing the functioning of the clump motor and
clump position sensing (A/B/C mode position)
q
Access HELP mode H-20, and press the PRINT key.
For the basic procedure for accessing HELP modes.
y
Press the STOP key. The HELP mode selection display will
reappear.
a To exit the HELP mode : Turn the power switch OFF.
a To access another HELP mode : Enter the desired mode number
using the numeric keys.
2. Operation procedures
H-20
(1) Function testingHELP mode
H-20
Mode number flushes
NOTE
For Standards / Adjustment
\See page 218
For Standards / Adjustment
\See page 220
B mode
A/C mode
For desccription of operation
\See page 112
\See page 291
To Next Page
Loading...
