Duplo Duprinter DP-43S - Page 360

360
c HELP Mode Function and Operation Procedures
chap.7
H-61
(1) Adjustment / specification settingHELP mode
1. Functions
Display Item Setting
0 0
**
Selection of LC display spec-
ifications
Japanese: Duplo
0 0 0 1 Korean*
0 0 1 0
Italian*
0 1
**
Japanese: Other
1 1 0 1 French*
0 1 0 1 Spanish*
0 1 1 0
English (icon)*
1 0 0 1
German*
1 0 1 0
Russian*
1 1 0 0
English
0 0 0 0 Factory setting
11 **
Other foreign language
(1) Selection of LCD specification
2. Operation procedures
- L -
****
Correction amount display
During memorization:
(1) Selection of LCD specification
qAccess HELP mode H-61, and press the PRINT key.
For the basic procedure for accessing HELP modes.
wUse the [0] and [1] numeric keys to enter a 4-place binary value for
the desired correction amount. See the table below for 4-place
binary values and the corresponding correction amounts.
rPress the STOP key. The HELP mode selection display will
reappear.
a To exit the HELP mode : Turn the power switch OFF.
a To access another HELP mode : Enter the desired mode number
using the numeric keys.
ePress the [=] key. The correction amount will be memorized
in the battery PCB unit's EEPROM. During memorization, "-L-"
will be displayed.
Do not turn off the power before the "-L-" display has disappeared.
IMPORTANT
\See page 291
* DP-43S, 33S, 31S