Duplo Duprinter DP-43S - Page 80

81
Chap.1 ⁄1 Option
EDIT
F-SET
MENU
PRINTING
1
×
Ａ3
１００％
PRINTING


MENU
6．DRUMSIZE
SPECIALFUNCTION
A4A3
SPECIALFUNCTION
6．DRUMSIZE
A4
A3
SPECIALFUNCTION
6．DRUMSIZE
A4
A3
PRINTING


MENU
In E type machines, input is by pen. For
input, be sure to use the input pen
provided among the accessories. Do not
apply undue pressure to the LCD pa
nel.
1. Make sure that the basic screen is displayed.
2. Press MENU.
3. Press the " " special function icon.
4. Press or repeatedly until the display
shown on the right is displayed.
5. Press " A4". When pressed, it will change to " A4".
• If an A3 drum has been installed, setup of
an A4 drum can not be performed. In such
a case, first install an A4 drum, then start
again from step 1.
• If an A4 drum has been installed, setup of
an A3 drum can not be performed. In such
a case, first install an A3 drum, then start
again from step 1.
6. Press the return icon.
7. Press the return icon.
The basic screen will be displayed.
IMPORTANT
:
▽

△

IMPORTANT
:
The procedure for setup of an A3 drum (after an A3
drum has been installed) is the same as that for setup
of an A4 drum above, except that " A3" must be
pressed instead of " A4" in step 5.
• Basic screen
2. A4 drum setup (for DP-43E)
• A3 drum setup