186
Solution 862
Installation Manual
System Status Reporting Options
LOCATION 359
1
Option Description
0
No Report Required
1
Receiver 1
2
Receiver 2
4
Receiver 1 and Receiver 2
8
Receiver 2 Only When Receiver 1 Fails
Table 98: System Status Reporting Options Location
This location is factory default to report only to receiver 1. You can select whether the system
status reporting options will report on receiver 1, receiver 2, both receiver 1 and receiver 2,
receiver 2 only when receiver 1 fails or no reporting at all.
ISSUE130 Electronics Design and Manufacturing Pty Limited
To Next Page
Loading...
