System Functions 89
Master Code Functions
Master Code Functions are designed to allow those users that have the appropriate priority
level to perform certain functions of a supervisory level. These functions can only be carried
out when the system is in the disarmed state.
The default Master Code is
2580
and is known as User Code 1. It is possible for
the system to have multiple Master Codes. Refer to "User Code Priority" on page 153 for
more information.
To enter the required Master Code function, enter the followed by the required
digit and the button. All available Master Code functions are listed in “Table
33: Master Code Functions” outlined below.
+ +
Function Description Page
0
Reserved
1
Changing and Deleting User Codes/Radio Codes 90/92
2
Changing Domestic Phone Numbers 94
3
Changing Telco Arm/Disarm Sequence 96
4
Setting STAY Mode 2 Zones 101
5
Turning Outputs On/Off 102
6
Setting The Date and Time 104
7
Walk Test Mode 105
8
Event Memory Recall Mode 106
9
Reserved
Table 33: Master Code Functions
Reserved
0
Electronics Design and Manufacturing Pty Limited ISSUE130
To Next Page
Loading...
