20
Solution 862
Installation Manual
Zone Defaults
The default zone settings of the control panel are listed in the table below. Zones 1 – 6 may be
programmed to any of the available zone types. Zones 7 and 8 are limited to that they may
only be programmed to any 24 hour or keyswitch type. Refer to “Table 2: Available Zone
Types” on page 20 for the different zone types that may be selected.
Zone No Zone Type Zone No Zone Type
1
Delay-1
5
Instant
2
Handover
6
Instant
3
Handover
7
24 Hour Fire
4
Handover
8
24 Hour Tamper
Table 1: Zone Defaults For Solution 862
Zone Types
There are thirteen different zone types to choose from when programming zones. These
thirteen different zone types are available for all
Solution 862
control panels. Refer to
Zone Programming on page 161 for more information on programming zones.
Zone Type Description Zone Type Description
0
Instant
8
24 Hour Hold-Up
1
Handover
9
24 Hour Tamper
2
Delay-1
10
Reserved
3
Delay-2
11
Keyswitch
4
Reserved
12
24 Hour Burglary
5
Reserved
13
24 Hour Fire
6
24 Hour Medical
14
Chime Only
7
24 Hour Panic
15
Zone Not Used
Table 2: Available Zone Types
ISSUE130 Electronics Design and Manufacturing Pty Limited
To Next Page
Loading...
