94
Solution 862
Installation Manual
Changing Domestic Phone Numbers
2
When the system has been set up for domestic dialling, this function allows the Master Code
holder to view and program the required telephone numbers that the system will call in the
event of an alarm. For a more detailed description, refer to Domestic Dialling on page 119 for
further information.
How To Change Domestic Phone Numbers
1.
Enter your followed by
2
and the button.
Three beeps will be heard and the
STAY
and
AWAY
indicators will begin to flash.
If there are telephone numbers already programmed, they will be displayed one digit at
a time via the remote codepad indicators. Refer to "Table 38: Codepad Indicators When
Changing Domestic Telephone Numbers" on page 95 for the indicators and their
meanings.
If there are no telephone numbers programmed, a further two beeps will be heard after
entering this mode. These two beeps are normally heard after the last digit of the last
phone number has been displayed.
2.
Enter all the digits for
, one digit at a time. You will notice as each digit is
entered, the corresponding codepad indicators will illuminate.
3.
If there is more than one telephone number, press the button followed by the
4
button after the last digit of the telephone number. This will insert a break between the
first telephone number and the second telephone number. If there is only one telephone
number, press the button to exit this mode.
4.
Enter all the digits for
, one digit at a time. You will notice as each digit is
entered, the corresponding codepad indicators will illuminate.
5.
After the last digit of the second telephone number, press the
button to exit this
mode unless a third telephone number is required. If there is a third telephone number
to be programmed, press the button followed by the 4
button to insert a break
between the second telephone number and the third telephone.
+
2
+
+ + +
4
+ +
Digit Required Number To Program Digit Required Number To Program
0
0
8
8
1
1
9
9
2
2
*
*
Followed By
1
3
3
#
*
Followed By
2
4
4
Four Second Pause
*
Followed By
3
5
5
Break
*
Followed By
4
6
6
7
7
Table 36: Domestic Dialling Digits
ISSUE130 Electronics Design and Manufacturing Pty Limited
To Next Page
Loading...
