EDM Solution 862 - Disarming the System from AWAY Mode

System Operations 53
Disarming The System From AWAY Mode
When you enter the premises after the system has been armed in AWAY Mode, you will need
to disarm the system from AWAY Mode to disable detection devices that will activate the
sirens, strobe and bell outputs.
If there has been an alarm condition prior to disarming the system from AWAY Mode, a
flashing
ZONE
indicator will be displayed, indicating a previous alarm on that zone.
How To Disarm The System From AWAY Mode
1.
Enter your
followed by the button.
Two beeps will be heard and the
AWAY
indicator will extinguish.
+
Electronics Design and Manufacturing Pty Limited ISSUE130