214
Solution 862
Installation Manual
Programming Option Bits
When programming these locations, you will notice that there are four options per location.
You may select one, two, three or all four of these options, however, only one number needs to
be programmed. This number is calculated by adding the option bit numbers together.
Program a seven (7) if you require options 1, 2 and 4 simultaneously (i.e. 1 + 2 + 4 = 7).
Example
If at "LOCATION 424" you want options 1, 2 and 4, add the numbers together and the total is
the number to be programmed. In this example, the number to be programmed is 7 (i.e. 1 + 2
+ 4 = 7).
Option Description
1
EDM Smart Lockout Allowed
2
Horn Speaker Monitor
4
Strobe Indication For Radio Arm/Disarm
8
Horn Speaker Beeps For Radio Arm/Disarm
Table 122: Example - Programming Option Bits
ISSUE130 Electronics Design and Manufacturing Pty Limited
To Next Page
Loading...
