EDM Solution 862 - Satellite Siren Service Mode

86
Solution 862
Installation Manual
How To Disable STAY Mode 2 Zones
If at any time you wish to disable all zones selected to be automatically isolated for STAY
followed by
4
and the button, followed
by
Mode 2, you may enter your
the button.
+
4
+
+
Satellite Siren Service Mode
5
If an EDMSAT is connected to Output 1, this function will allow you to perform service work
on the system without triggering the satellite siren. The satellite siren will return to its normal
working state the next time the system is armed.
How To Enter Satellite Siren Service Mode
1.
Enter your
followed by
5
and the button.
Three beeps will be heard.
+
5
+
ISSUE130 Electronics Design and Manufacturing Pty Limited