EDM Solution 862 - Radio Input Options

222
Solution 862
Installation Manual
Radio Input Options
LOCATION 431
0
Option Description
1
Radio Receiver (WE800)
2
Latching Keyswitch Input
3
Momentary Keyswitch Input
4
Reserved
1
2
4
Table 132: Radio Input Options
Radio Receiver (WE800)
This option needs to be selected when using the optional 304 Mhz RF Receiver (WE800) for
remote operations using radio remote hand held transmitters.
Latching Keyswitch Input
This option allows you to connect a latching keyswitch to the JP3 terminals D and GND to
remotely arm and disarm the system in AWAY Mode.
Momentary Keyswitch Input
This option allows you to connect a momentary keyswitch to the JP3 terminals D and GND to
remotely arm and disarm the system in AWAY Mode.
ISSUE130 Electronics Design and Manufacturing Pty Limited