Emerson unidrive m200 - DI 03 Destination B; DI 04 Destination B; DI 05 Destination B; Relay 01 Source B

Parameter 08.123 DI 03 Destination B
Short description Defines the secondary destination parameter for digital input 3
Mode Open‑loop
Minimum 0.000 Maximum 30.999
Default Units
Type 16 Bit User Save Update Rate Drive reset read
Display Format Standard Decimal Places 3
Coding RO, DE, ND, NC, PT
Refer to control parameters ( DI1Control (08.081) for more information.
Parameter 08.124 DI 04 Destination B
Short description Defines the secondary destination parameter for digital input 4
Mode Open‑loop
Minimum 0.000 Maximum 30.999
Default Units
Type 16 Bit User Save Update Rate Drive reset read
Display Format Standard Decimal Places 3
Coding RO, DE, ND, NC, PT
Refer to control parameters ( DI1Control (08.081) for more information.
Parameter 08.125 DI 05 Destination B
Short description Defines the secondary destination parameter for digital input 5
Mode Open‑loop
Minimum 0.000 Maximum 30.999
Default Units
Type 16 Bit User Save Update Rate Drive reset read
Display Format Standard Decimal Places 3
Coding RO, DE, ND, NC, PT
Refer to control parameters ( DI1Control (08.081) for more information.
Parameter 08.128 Relay 01 Source B
Short description Defines the secondary source parameter for relay 1
Mode Open‑loop
Minimum 0.000 Maximum 30.999
Default Units
Type 16 Bit User Save Update Rate Drive reset read
Display Format Standard Decimal Places 3
Coding RO, ND, NC, PT
See DO1Control (08.091).
Unidrive M200 Parameter Reference Guide
Issue: 01.05.00.10
121