Emerson unidrive m200 - Percentage Trim; Reference Select Flag 1 - 3; Preset Select Flag 1;2

Parameter 01.038 Percentage Trim
Short description Defines the value of the reference trim as a percentage
Mode Open‑loop
Minimum -100.00 Maximum 100.00
Default 0.00 Units %
Type 16 Bit Volatile Update Rate 4ms read
Display Format Standard Decimal Places 2
Coding RW, NC
See ReferenceOffset (01.004).
Parameter 01.041 Reference Select Flag 1
Short description Defines which reference is selected by the drive
Mode Open‑loop
Minimum 0 Maximum 1
Default 0 Units
Type 1 Bit Volatile Update Rate 4ms read
Display Format Standard Decimal Places 0
Coding RW, NC
See ReferenceSelector (01.014).
Parameter 01.042 Reference Select Flag 2
Short description Defines which reference is selected by the drive
Mode Open‑loop
Minimum 0 Maximum 1
Default 0 Units
Type 1 Bit Volatile Update Rate 4ms read
Display Format Standard Decimal Places 0
Coding RW, NC
See ReferenceSelector (01.014).
Parameter 01.043 Reference Select Flag 3
Short description Defines which reference is selected by the drive
Mode Open‑loop
Minimum 0 Maximum 1
Default 0 Units
Type 1 Bit Volatile Update Rate 4ms read
Display Format Standard Decimal Places 0
Coding RW, NC
See ReferenceSelector (01.014).
Parameter 01.045 Preset Select Flag 1
Short description Defines which preset is selected by the drive
Mode Open‑loop
Minimum 0 Maximum 1
Default 0 Units
Type 1 Bit Volatile Update Rate 4ms read
Display Format Standard Decimal Places 0
Coding RW, NC
See ReferenceSelector (01.014).
Parameter 01.046 Preset Select Flag 2
Short description Defines which preset is selected by the drive
Mode Open‑loop
Minimum 0 Maximum 1
Default 0 Units
Type 1 Bit Volatile Update Rate 4ms read
Display Format Standard Decimal Places 0
Coding RW, NC
See ReferenceSelector (01.014).
Unidrive M200 Parameter Reference Guide
Issue: 01.05.00.10
25